Adjustment Manual



In this manual, we will explain step by step procedures on how to use the link removal tool to remove links so you can shorten your Berman piece to the best fit.


Step #1 

Remove piece and sizing adjustment tool from packaging and turn over.



Step #2

Open at the lugs and fully expand the piece.


Step #3

Locate the arrows on the backside of the piece and insert the link adjustment tool upwards facing the arrow. 


Step #4

Remove the link by twisting the adjustment tool fully. The pin will appear on the other side of the tool once fully screwed in.

Remove the pin from the band/



Step #5

Seperate the band and place the pin above.



Step #6

Repeat Steps 4 & 5, with the slot located above the previous slot removed.


Step #7

Remove the pin and detach a lug.


The first link has just been successfully removed.


Step #8

Place the link and 2 pins to the side, and re-attach the piece.


Step #9

Insert the pin back into the piece.


Be sure to fully insert the pin, this can be achieved by applying pressure on a hard surface until the pin is flat like the others.


Step #10

 Now pat yourself on the back. 

You have just successfully removed one link from your new BERMÁN piece.

Remove as many links as needed to achieve your desired fit.